G218A |
RFQ for G218A Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| G218A | - | SMD | - |
The G218A Multi-mode LVD/SE SCSI terminator provides a smooth transition into the next generation of the SCSI Parallel Interface (SPI-2). It automatically senses the bus, via DIFFSENS, and switches the termination to either single-ended (SE) or low voltage differential (LVD) SCSI, dependent on which type of devices are connected to the bus. If the G218A detects a HVD SCSI device, it switches to a high impedance state. For a 16-bit Wide SCSI bus to be operational, three G218A terminators are needed.
The Multi-mode terminator contains all functions required to terminate and auto detect and switch modes for SCSI parallel Interface (SPI-2) bus architectures. For the SE termination, one regulator and nine precision 110ohm resistors are used. For the LVD termination, the G218A integrates two regulated supplies with nine precision resistor strings.
Typical Application |
Features |
| · Server and workstation·High-end PC·Industrial PC·Disk Array (RAID)·SCSI cable | · Auto-selectable multi-mode Single-Ended or LVD Termination· Meets SCSI-1, SCSI-2, SCSI-3 SPI Ultra (Fast-20), Ultra 2(SPI-2 LVD), Ultra160 standards.· Supports active negation· Current limit and thermal protection· Hot-Swap compatible (Single-Ended)· 5% tolerance on SE and LVD termination resistance· 28 and 36 pin SSOP package· 28 Pin SSOP: Pin Compatible with DS2119· 36 Pin SSOP: Pin Compatible with DS2118, LX5241 and UCC5630 |
| Models | MFG | Pack |
| G21153 | ||
| G2178BYG | ||
| G2180HEX(PRFMD) | ||
| G218A | SMD | |
| G218AS4 | ||
| G218B | ||
| G218BR-D3 | ||
| G219 | TSSOP-3.9-28P | |
| G219R-D3 | ||
| G2123 | ||
| G2113 | ||
| G-2012-1315 | ||
| G20-00A | ||
| G200000 | ||
| G2.5X3WH6-A | ||
| G2.5X3WH6 | ||
| G2.5X3LG6-A | ||
| G2.5X3LG6 | ||
| G2.5X3BL6 | ||
| G1X4WH6-A | ||
| G1X4WH6 | ||
| G1X4LG6-A | ||
| G1X4LG6 | ||
| G1X4BL6 | ||
| G1X3WH6-A | ||
| G1X3WH6 | ||
| G1X3LG6-A | ||
| G1X3LG6 | ||
| G1X3BL6-A |
